top of page

Patented

eSCOPE ELITE8 with Tablet (ESO3100)

Harness the power of 8 channels!

EScope-Elite8-no-tablet.jpg

eSCOPE ELITE8 (ESO3100)

NEWLY ADDED DTC Stop Scope feature allows the Automotive Test Solutions eSCAN ELITE (purchased separately) to stop the eSCOPE ELITE Deep Record when a pending, or permanent DTC is set. This ensures a data capture at that moment.

► Capture All Data: ATS’ unique circular buffer system does not drop data.  No data gap will ever be present on our scopes; this means you will never lose data that occurs between samples on an intermittent fault or fail to capture the vehicle’s faulty event.

► Ultra Sharp Wave-forms: No need for filters that can mask data. ATS designs our scopes so the signal is accurate and clean.

► Dual Time Base:  This allows two different frequencies to be displayed on one screen with two different scope displays, simultaneously.  This also allows separate triggers and/or trigger modes on each time base. It’s like having two scopes in one.

► Pull Down Circuit: A Controlled pulse that sinks power from vehicle circuit to ground.  Control circuits like ignition coils, fuel injectors and solenoids.

► TTL Output: Sends a 0-5v square wave signal out of scope.  Turn on devices such as ignition coil drivers, test vehicle’s circuits, and test vehicle’s circuits for loading.

► Automatic Test Lead Connection Detection: This unique feature allows you to know the scope lead has a good connection. “Red”= Bad connection.  “Green”= Good connection.  It’s that easy!

► No Time, Voltage, or Trigger Setup Needed: With the powerful Deep Record function, you can grab a large amount of data without any setup at all. Then simply zoom in to see what happened! Turn signals on/off, and rearrange waveforms as you wish. Saved files can be reopened and manipulated in the same way at any time.

► Automatic voltage attenuator: Just change the voltage setting and the scope does the rest.

► Pressure Transducers: Drives four pressure transducers at once with full pressure/vacuum conversions.

► Patented Overlay Technology: ATS’ unique programming overlays an engine cycle grid over your waveforms. Works great with pressure transducers!

Call 800.572.6112 for financing options

escope-ckp-screen-shot.png

Quickly find engine misfires from the crankshaft position sensor. Works on gasoline or diesel engines.

Includes Revolutionary CKP misfire software.
Click here for more information

Converts CKP signal into an advanced misfire analyzer!

patent pending

Technicians-Choice-Awards-2020.png
MOTOR-Top20_2021_escope-elite8.png
ESCOPE-ELITE8-exploded-kit.jpg

eSCOPE ELITE8 Accessory Kit

Included with all eSCOPE ELITE8 kits

Check out the features of the eSCOPE ELITE8:

Number of Channels:

 

Traces:

A/D Vertical Converter Resolution:

Maximum Scope Throughput:

Voltage Attenuator:

Display Modes:

Deep Record Mode:

Pressure Transducer:

Ignition analyzer: 

PC Compatible:

 

 

Power Requirements:

USB connection to PC:

Scope Storage:

Support:

8 traces.

Separate colors for each channel that match leads.

16 bit (65,536 discrete levels).  This gives very fine voltage resolution over a very large voltage range.  I.E. +/-20 volt range has a 0.0006 mV resolution.

1 Mega samples per second.

Up to +/-500V software selectable attenuator built into scope.

Dual Screen, Single Screen, Stacked Scope, Measure and Deep record, and Meter.

Allows data to be recorded without any setup at all and without missing any data.  Then use features such as zoom in, zoom out, zoom window, zoom reset and cursors.  Apply filtering, turn signals on/off, and rearrange waveforms as you wish. Saved files can be reopened and manipulated in the same way at any time.

Drives four pressure transducers at once with full Pressure/Vacuum conversions. Additionally the eSCOPE ELITE8 comes with patented pressure transducer overlays.

 

Includes full ignition analyzer software.

Runs on most Intel or AMD Processor Windows based PC.

Will NOT run on the Microsoft Surface Pro X ARM64-based PC with the Microsoft SQ1 processor.

Powered via PC’s USB connector. 

USB 2.0 or USB 3.0.

Unlimited Storage of waveforms and settings.

Built in help plus U.S. based customers receive live one-on-one log in support.

Kit Contents

eSCOPE ELITE8 (ESO3100) contents

EScope-Elite8-case-open.jpg
escope elite 8 kit contents
EScope-Elite8-no-tablet.jpg

eSCOPE ELITE8

9ft-battery-ground.jpg

Ground Lead

banana-plug-adapter.jpg
banana-plug-adapter.jpg

Banana Plug Adapters

fusepack-crop-u72509.jpg

Fuses

CA60-small-amp-clamp.jpg

CA-60 Low Current Amp Clamp

lead-kit-set-of-8-no-battery-ground.jpg

BNC to Banana Plug Leads

lead-extensions.jpg

Lead Extensions

gator-clips-set-of-10.jpg

Alligator Clips

EIG1110inductivepickup.gif

Inductive Trigger Pickup

aux_lead.jpg

Banana Plug Auxiliary  lead

back-probes-set-of-8.jpg

Back Probes (set of 8)

Tpiercers-set-of-8.jpg

T Wire Piercers

CA600-large-amp-clamp.jpg

CA-600 High Current Amp Clamp

usb-card-closed-sm.jpg

ESCOPE ELITE8 USB Program Card

Gatorclips-set-of-9.jpg

Accessories

Tpiercers-set-of-8.jpg
lead-kit-set-of-8.jpg

T-Wire Piercers

Alligator Clips

BNC to Banana Plug Leads

aux_lead.jpg

Banana Plug Auxiliary Lead

1l-lead.jpg

BNC to Banana Plug

Lead Individual

lead-extensions.jpg

Lead Extensions

fusepack.jpg

eSCOPE Fuse Pack

1-lead-extension.jpg

Lead Extensions

Individual

back-probes-set-of-8.jpg

Back Probes (set of 8)

9ft-battery-ground.jpg

Ground Lead

bottom of page