EScope Pro (P/N ESO1000) (Patent Pending) $4,995.00

EScope Pro & Ruggedized Notebook PC (P/N ESO1001) $6,990.00

The EScope Pro is a powerful 16 bit PC based 8 channel, adjustable dual time base oscilloscope with complete accessory kit. EScope Pro allows bi-directional control of electrical devices through the wiring, feedback equation (virtual replacement of electrical sensors), and more...

Scope 8 circuits at the same time on 2 separate time bases. View fast timing signals and slow O2 signals on the same screen at the same time.

The EScope Pro will supply power to and read up to four pressure transducers
simultaneously. ATS patent pending software grid overlays make analyzing pressure waveforms a snap. The software will automatically convert pressure transducer voltages to pressure readings, making them easy to use and simple to read.

View large, colorful, razor sharp waveforms on your hi-res PC display. Designed for ease of use and backed by service and technical support before and after the sale. No laptop? No problem. We'll load Escope Pro into a customized, shop-tough laptop and ship you the works, ready to roll. Just fire it up and go.

Unlike stripped down models from some competitors, Escope Pro comes "with the works." You get a huge assortment of test leads, wire piercers, clips, clamps, cords, and probes. Everything you will need to start fixing vehicles FAST!

Designed from the ground up as part of a test solution package, you can expect it to work and play well with other ATS products as you build a diagnostic system unlike any other.

It Ain't Magic, But It's Close
Do you already own our EScan and 5 Gas emissions analyzer? Great! You'll like how Escope Pro can be connected to both--wirelessly. Now you can view scope, scan, and emission data -- live -- at the same time; on the same screen.

Check out all you can do with this Motor Top 20 Award Winner!

• Scope EIGHT circuits at the same time on two different time bases.
• Allows bidirectional control of electrical devices, feedback equation (virtual replacement of electrical sensors).
• The first device that is configured to mount the PC notebook directly to the
  scope case making the EScope Pro a powerful diagnostic platform.
• Can be purchased with a laptop custom configured to run the EScope Pro.
• Can be used simultaneously with wireless connections to the Emission 5
  Gas Analyzer and the EScan scan tool. This allows the technician to view live
  waveforms, 5 gas data, and scan tool data on one screen while remaining
  hand held and fully portable.
• Power and then scope FOUR pressure transducers at the same time.
• Convert pressure transducer voltage to actual pressure or vacuum readings.
• Inject sensor signal simulations; test computer responses in live circuits.
• +/- 20 or +/- 500 Volt Range on all Eight Channels (Built in 50X Dividers!)
• >1 Mega Ohm Input Impedance on all Eight Channels.
• 16 Bit (0.0015%) Resolution on all Eight Channels.
• Large 1024x768 Pixel (XGA) Viewing Area with Large Colored Traces.
• Data Can be Saved to Text File for Future Retrieval.
• Data Can be Saved to JPEG Image for E-mailing or Documentation.
• Web Enabled for Remote Monitoring on LAN or Internet
• Operate actuators (coils, injectors, motors) to test their performance, with
  the press of a button.
• Add proper CAT III test leads and start testing hybrid vehicle high voltage
  electrical systems.
• Use factory presets for common tests, or record your own.
• Make fast adjustments on the fly with our easy-to-use on-screen control console.
• Free EIgnition software allows up to 8 individual triggers so waveforms can
  be superimposed.
• The EScope Pro will work on all hybrid vehicles.
• All EScope Pro accessories are included.
• Free software updates!
• Free technical support!

No more tripping over extra cords and cables! Less fuss. Less hassle. Less clutter.
Quicker hook ups. Better diagnoses and fewer comebacks = MORE PROFIT!

8 Channel Dual Time Base Oscilloscope

• All Channels in Full Color with Masking to assist troubleshooting
• Dual Time Bases, Both Viewable Simultaneously on Separate Charts
• Each Channel can be Turned On or Off on Either Chart while Running or Holding
• Hold Buttons Allow Viewing of Last Five Screen Sweeps

8 Channel Stacked Oscilloscope

• Stacks Dual A Oscilloscope Data with Independent Ranges for Each Channel
• All Channels in Full Color with Masking to assist troubleshooting
• Hold Buttons Allow Viewing of Last Five Screen Sweeps
• MultiTool Tab allows Simultaneous Viewing of EScope Data along with Data from other ATS Diagnostic Tools

Measure and Deep Record

• Use cursors to easily measure voltage, voltage difference, period (s), and frequency (Hz)
• Easily Zoom Window, Zoom In, Zoom Out, Zoom All (extents) with mouse
• Easily Pan using mouse
• Data to be measured can come from Plot A, Plot B, or Deep Record
• Deep Record allows continuous recording of 500,000 samples of data on all eight channel
• After 500,000 sample buffer has been filled recording will continue erasing start of buffer only so the last 500,000 samples are always available for viewing and saving to file
• Mark Data (Page Up) Button: Allows you to mark events while recording data

8 Voltage Meters

• Eight Digital Readouts
• Eight Slide Bar Readouts in Vivid Color
• Independent Slide Bar Range Adjustments for Each Channel

Two Channel Timing Generator & Counter

• One TTL Output with Frequency and Duty Control
• One Pull Down Circuit with Frequency and Duty Control. Can Control High Current Devices like Fuel Injectors, EGR Solenoids, Canister Purge Solenoids, etc.
• Two Counter Inputs that can Measure Frequency, Period, Pulse Width, and Number of Pulses
• Chart Graphing for Count History

Two Channel Function Generator

• -10 to +10 Volts DC output
• Automotive Sensor Simulator Intercepts Sensor Signal on Meter and Sends Modified Signal to PCM
• Slow Frequency Waveform Generation: Sin, Triangle, Square, and Sawtooth (Ramp)

Demo Mode Playback of Files

• Files recorded can be played back as live data
• Provides ideal training setup without needing problematic vehicles in classroom
• Files can be created by instructor or can be loaded from library provided by ATS

Kit Includes:

• EScope Pro and Software
• 10 Color Coded 9ft BNC to Banana Plug Leads
• 1 9ft Ground Lead
• 9 12ft Color Coded Lead Extensions
• Low Current Amp Clamp (60A Max)
• High Current Amp Clamp (600A Max)
• 12 Color Coded Alligator Clips with Banana Jacks
• 8 Color Coded Back Probes with Banana Jacks
• 8 Color Coded T Wire Piercers
• 2 Test Probes with Banana Jacks (One Black, One Red)
• Inductive Pickup
• EIgnition Software
• 2 Banana Plug Adapters
• AC Coupler
• 12V DC Power Supply (Battery Clips)
• Power Supply to Cigarette lighter
• Power Cord
• USB Cable
• Bracket Set for Laptop
• 2 Extra EScope Fuses
• Hard Plastic Case with Foam Padding for Accessory Kit
• Advanced Use of the Oscilloscope video

Auxiliary Port for Future Expansion

• Ignition Analyzer (Patent Pending): View and Power Balance Testing on Most Ignition Systems
• 5 Gas Analyzer
• Scan Tool
• Transmission Analyzer
• Cooling System & AC Analyzer

For the EScope Pro we recommend the following:

• XGA (1024x768 Pixel Resolution Screen)
• 2 GHz or Duo Core Processor
• Windows XP or Vista Operating System
• 512 MB RAM (more is better)
• 500 MB Available Hard Disk Space
• USB 2.0 Hi-Speed Port

• Software Download/Update Page

• Escope Article - Air Strike

• 2004 Motor Magazine Top 20 Tool Award Write-Up (PDF)

• 2004 Motor Magazine Top 20 Tool Award Write-Up (Text)

• Escope Article - Making the Shift

• Additional screen shots taken with the EScope - Page 1

• Additional screen shots taken with the EScope - Page 2

• Additional screen shots taken with the EScope - Page 3

• Understanding Fuel Injector Waveforms Tutorial

• Comparison of EScope & Automotive Oscilloscopes (PDF file)