Emission Download and Installation of latest version - Rev 1.10:

Checking your software version:
To see what version you are currently using load your Emission software, click on the "Help" tab and then click the "About" text in the upper left hand corner of your screen.

This can also be installed and used in Demo Mode to learn how the Emission works if you do not already own one.

• Download http://www.automotivetestsolutions.com/download/EmissionInstall.zip (~12MB) to your desktop.

• Double-click on the downloaded file on your desktop to view the zipped contents.

• Double-click on Setup (Application) to install the Emission. If the installer asks you if it is OK to uninstall the existing version allow it to do so and then run the Setup again to install the new version.

• Note that the Emission program will only run if you have your computer connected to the ATS Emission with power on unless you run it in Demo Mode.

• The first time you run the Emission program it will ask you for a passcode to unlock the software unless you run it in demo mode.  To get your passcode, contact Automotive Test Solutions at 800-572-6112 or support@atsnm.com and provide the computer ID that the program shows you at startup.  ATS will provide you with your passcode.  The next time you upgrade your Emission software you will not have to do this.

• See bottom of page for driver and Windows VISTA information.

Revision History (most recent version can be downloaded above):

• 10/25/2007: Rev 1.10:
  • First version posted on this page.
  • "Auto Diagnose" functionality enabled.

Vista & XP Drivers for USB to Serial Adapters:

Below are download links for USB to Serial adapters sold with Emissions.  If you are upgrading from XP to VISTA you probably need to download one of the below drivers.  To install, download and unzip the appropriate driver file.  Then read the "Installation Directions.txt" file for details.

• www.atsnm.com/download/BelkinF5U409.zip Belkin Adapter (came with most Emissions after 2006)

• www.atsnm.com/download/IOGearGUC232A.zip IOGear adapter (most Emissions through 2006)

NI VISA Driver:

If you are using Windows VISTA you will also need the NI VISA (version 4.1 or newer) driver to be installed on your computer for the Emission to work with all types of serial adapters (direct, USB, & Bluetooth). If you have already installed a driver for other ATS diagnostic products you should already have this driver installed and you can contact ATS to verify. See the below link to install NI VISA:

• Download visa410runtime.exe (~30MB) and save to your hard drive.

• Run the downloaded file and allow it to unzip.

• Run the unzipped installer (should run automatically after unzipping).

• Accept all defaults and reboot if asked.