DLC Breakout Box (P/N BOB1000)

$245.00 Click here to buy it now.

What? The car won't talk? The scan tool can't make a connection
at the Data Link Connector (DLC)?

This could get ugly.

Time to call EB.O.B., the ATS Data Link Connector breakout box.

Plug and Play
Just plug EB.O.B. into the vehicle DLC and he does his stuff--automatically. He checks power and ground, and watches DLC data wires, looking for voltage pulses. Then he illuminates colored LEDs to let you know what's working--and what isn't!

Your scan tool plugs into EB.O.B.’s cable extension. Convenient banana jack
test ports in the console let you test circuits with a meter or scope--while they work.

We've even included a handy 15 foot fused jumper wire to let you power your scan
tool if there's no juice at DLC pin 16. Tests and solutions: it's what we do best.

• Finds communication problems FAST!
• Connects to the OBDII diagnostic connector (DLC).
• Scan tool connects to DLC Breakout Box allowing a testing interface.
• LEDs indicate power, grounds, and signals.
• LEDs will flash indicating protocol being used - ISO-9141-2, KWP2000,
  J1850 (PWM and VPM) and CAN Bus types.
• Banana jacks allow easy entry to test circuits fast with an oscilloscope.
• Kit includes 15 ft fused jumper wire (if vehicle fuse is blown or ground connection
  to DLC is bad, jumper wire can be used to quickly power or ground scan tool).